Sugar Creek, MO HVAC & Plumbing Services

Customer has pneumatic zoning system that was acting up and making a lot of noise from internal vacuum pump. Found that constant power switch to pump was in on position. Turned to off and tested system and everything was functioning normally.

Arrived. Customer explained that her floor drain in her basement have been backing up. Upon inspection and flushing the floor drain with bubble up. Grabbed 300 auger and ran machine through inside clean out running the full extent of my cable. Pulled back a lot of flushable wipes and some routes. Flush toilet multiple times and ran shower without back ups occurring. Line is open and flowing

Plumbing Repair: A homeowner contacted us regarding a leak in their plumbing system. Our team promptly identified a damaged pipe as the source of the issue. We conducted precise plumbing repairs, replacing the damaged section and ensuring a leak-free plumbing system for the client.

Upon arrival checked all components in the heating mode check static static was high after that checked all electrical components Everything was good. Checked blower wheel on the first unit it was good second unit does need a blower wheel clean. Mentioned that to the customer he said he was gonna hold of on it. Customer did want a supervisor out on Wednesday to take a look at the unit and get an estimate for duct cleaning.

Company arrived today, October 27th, 2023 to perform plumbing inspection as part of the PSF membership. Started with water heater, unit is from 1985 making it 38 years old. Boiler drain on unit is leaking. Fill valve in first floor bathroom, float is getting help up causing water to continuously run into the overflow for 5-10 seconds resulting in excessive water usage and waste. No issues found within kitchen. Upstairs hall bathroom had slow drain at vanity, removed pop up and cleared debris. Tested and found flow restored. No other issues in hall bathroom. Master bathroom power flush is still acting up. Customer is aware and is planning on replacing flush cartridge. Faucet is loose at base on vanity. No other issue’s discovered during evaluation

Upstairs toilets not flushing correctly. Both ultra flush toilets, newer within 10 years. Checked pressure and found 80PsI with a 8-10PsI drop. No PRV on system. WQ is not terrible, suggested a sediment filter to help reduce the particulates in the water. Also suggested installing new pressure regulator valve. Provided options to rebuild ultra flush toilets

Water Heater Repair: Upon responding to a homeowner's complaint of inconsistent hot water, I conducted a detailed inspection and identified a malfunctioning heating element within their electric water heater. I promptly replaced the faulty element, resulting in the restoration of consistent and reliable hot water.